Sv sound, llc – SVS AS EQ1 User Manual
Page 16
AS-EQ1 Operator Manual
© 2009 SV Sound, LLC
•
6420 Belmont Avenue, Girard, OHIO
•
703.845.1472
•
www.svsound.com
SV Sound, LLC
6. After completing the calibration of your AVR or Pre/Pro, remove its Calibration Microphone along with
the calibration microphone patch cable from the AS-EQ1 and your AVR or Pre/Pro.
7. At this time, your AVR or Pre/Pro and the AS-EQ1 are integrated properly. Click on the Sub EQ GUI to
continue to the next Task, “Channel Configuration”.
16
The External Calibration task allows the AS-EQ1 to intercept the calibration tones intended for your subwoofer(s)
from the AVR or Pre/Pro and pass it directly back to the AVR or Pre/Pro. The AVR or Pre/Pro then interprets the re-
sponse from the subwoofer as flat, and as a consequence, no correction filters are assigned for the subwoofer(s).
The calibration of the Main/Satellite speakers are unaffected within the AVR or Pre/Pro using this process, and
this ensures only the AS-EQ1 will be handling the EQ of the subwoofers in actual system operation.
Calibrating the AS-EQ1 in Your Listening Environment
Capturing Subwoofer Calibration Tones