StorCase Technology 14-Bay 4U SCSI Ultra320 - Manual (Page 35)

26 InfoStation User Interface
StorCase Technology, Inc. InfoStation 14-Bay U320 User's Guide - Rev. A00
Fiber Channel Speed Set-Up
The following steps show how to change the InfoStation Fibre Channel Speed.
NOTES: This option only applies to FC-to-SCSI RAID InfoStation applications.
Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
ENTER
S t a t u s
S e t u p
T E M P : x x C
E n c . I D
ENTER
DOWN
ENTER
DOWN
F C S p e e d
UP/DOWN
F C S P D = 0
F C S P D = 1
F C S P D = 0
ENTER
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER so that display = Enc. ID.
4. Press DOWN until display = FC Speed.
5. Press ENTER so that display = FC SPD=1.
This is the current Fibre Channel speed.
6. Press UP or DOWN to change the Fibre Channel
speed.
7. Press ENTER to accept the change.
NOTES: FC Speed 0 = 1Gbps
FC Speed 1 = 2Gbps
Factory default is 2Gbps (FC Speed 1).