StorCase Technology 14-Bay 4U SCSI Ultra320 - Manual (Page 30)

InfoStation User Interface 21
InfoStation 14-Bay U320 User's Guide - Rev. A00 StorCase Technology, Inc.
Enabling/Disabling the Buzzer
The following steps show how to enable/disable the InfoStation alarm/warning buzzer.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Buzzer.
3. Press ENTER so that display = BUZ=ON (or
BUZ=OFF).
This is the current buzzer setting.
4. Press UP or DOWN to enable or disable the
buzzer.
5. Press ENTER to accept the change.