StorCase Technology 14-Bay 4U SCSI Ultra320 - Manual (Page 31)

22 InfoStation User Interface
StorCase Technology, Inc. InfoStation 14-Bay U320 User's Guide - Rev. A00
Enclosure ID Set-Up
The following steps show how to view and change the InfoStation Enclosure ID.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER so that display = Enc. ID.
4. Press ENTER so that display = Enc. ID=x.
This is the current enclosure ID.
5. Press UP or DOWN to change the enclosure ID
number.
6. Press ENTER to accept the change.
ENTER
S t a t u s
S e t u p
T E M P : x x C
ENTER
DOWN
ENTER
E n c . ID
E n c . I D = 0
UP/DOWN
ENTER
E n c . I D = 8
E n c . I D = 8