StorCase Technology 12-Bay 4U SCSI Ultra320 - Manual (Page 18)

InfoStation 12-Bay Installation Guide - Rev. A02 StorCase Technology, Inc.
Installation 13
10. Install the I/O Plates onto the I/O Panel using the same screws saved from Step 8.
11. Install cables onto the SCSI device and carefully reinstall the I/O Panel back onto
the rear of the InfoStation chassis. Make sure that none of the cables are
pinched when reinstalling the I/O Panel back onto the chassis.
12. If desired, affix labels (Figure 14A) onto the I/O Panel to help identify the I/Os (Figure
14B).
NOTES:
Labels (Figure 14A) can be found inside the InfoStation accessory
packet.
Disk Channel labels can be used for either Ch. 1 & 3 or Ch. 2 & 4
configurations.
Host Channel 1
Host Channel 2
Disk Channel 1/3
Disk Channel 2/4
IFS12_22
Figure 14A: I/O Labels
Figure 14B: I/O Label Location
Place I/O Labels in
any of these locations
IFS12_28