StorCase Technology DE110 - Manual (Page 18)

Ultra320 DE110 User's Guide - Rev. A03 StorCase Technology, Inc.
Installation 11
5. Connect the I/O cable from the host adapter to the receiving frame. The Pin 1 indicator
on the cable must be properly aligned.
6. Connect the power cable from the DC power supply in the computer or expansion
chassis to the power connector on the Ultra320 DE110 receiving frame. Refer to
Figure 5 for the Ultra320 DE110 receiving frame power connector location.
7. Replace any expansion boards that may have been removed earlier. Replace the
system cover according to the manufacturer’s instructions.
Spacer Plates (Optional)
NOTE: Depending on the computer system, spacer plates may be positioned on the
receiving frame to utilize either top or bottom row of side-mounting holes
(Figure 8B).
The Ultra320 DE110 is designed to fit most computer systems with standard 5.25" peripheral
slots. The installation of the spacer plates (provided) may or may not be necessary.
Figure 8B: Spacer Plate Installation (Optional)
Spacer Plate
(2 Total)
OR
0869