StorCase Technology DE110 - Manual (Page 14)

Ultra320 DE110 User's Guide - Rev. A03 StorCase Technology, Inc.
Installation 7
INSTALLATION
NOTES: Ultra320 DE110 receiving frames are indicated by their AMBER LED, while the
Ultra320 DE110 carriers are indicated by the Ultra320 logo.
For SCSI Ultra320 operation, the Ultra320 DE110 requires Ultra320 drives,
Ultra320 HBA, and Ultra320-compliant cabling (internal and external).
Preparation
NOTE: A #2 Phillips screwdriver will be required during this procedure.
While performing the steps in this section, work on a soft surface to prevent excessive shock
to the drive being installed. Also refer to the manufacturer's documentation provided with the
drive.
1. Remove the drive from its protective packaging.
Installing the Drive into the Carrier
1. Carefully insert the drive into the carrier. Slide the drive towards the Drive Carrier
Board, so that the I/O, DC power, and ID select connectors on the drive mate with
their respective connectors on the drive carrier board (Figure 6).
2. Fasten the drive into place with four (4) #6-32 Phillips Flat Hd. screws (Figure 6).
3. Install the provided drive cover (Figure 7).