StorCase Technology DE100i-SWD - Manual (Page 31)

DE100i-SWD User's Guide - Rev. C00 Kingston Technology Company
Appendix D - Optional Accessories 25
Figure D-2: Optional Data Express Drive Cover (DX100-COV)
The Data Express optional drive cover (DX100-COV) is an attractive metal cover which can
provide additional protection to the drive, preventing foreign material from coming in contact
with the drive and cables. The optional drive cover is similar to the cable cover provided with
the Data Express except the optional drive cover protects the drive as well as the cables. It
is easily installed with two 6-32 x 3/16" flat head screws as shown in the illustration above.
NOTE: The Data Express drive cover may not be compatible with all 3.5" half-height
drives. Exact drive height and fit within the Data Express frame can vary between
drive manufacturers. Please contact Kingston Storage for technical assistance
before ordering the Data Express drive cover.
Slip Drive Cover
Lip into Top Rear
of Carrier. The
Sides of the Cover
Will Fit Between
the Drive and the
Carrier. Mounting
Holes Must be
Towards Rear of
Carrier. 1
Swing Drive Cover
Down, Covering
the Drive. Make
Certain You Do
Not Damage
Connector Pins or
Cables. 2
Slide Drive Cover
Forward Making Certain
Front Cover Lip is Inside
Carrier. Fasten Screws. 3
Full Drive Cover (optional)
Disk
Carrier
Drive
Cover
Mounting
Holes
1
2
3
0067
Drive Cover