StorCase Technology DE100i-SWD - Manual (Page 29)

DE100i-SWD User's Guide - Rev. C00 Kingston Technology Company
Appendix C - Attaching the On/Off Key 23
The following information will provide the necessary steps to attatch the On/Off key to the
key/lock mechanism so that it is non-removable, preventing accidental key loss. The
procedure can be reversed if, at a later date, you want to remove the key.
1. Make certain power is off to the receiving
frame.
Locate the rectangular shaped key/lock
mechanism access hole on the inside of the
receiving frame. Note that the pawl is in an
upright position.
Insert the key into the key/lock.
2. Rotate the key 90 degrees counter-clockwise
so that the pawl is visable in the access hole as
shown in the figure at left.
3. Using the provided adjustment tool, unscrew
and remove the pawl from the access hole.
4. Rotate the key 180 degrees clockwise (or
counter clockwise).
5. Reinstall the pawl into the access hole with the
adjustment tool..
Your key is now attached to the key/lock
mechanism.
0156
Pawl
Access
Hole
Key/Lock
90
Degrees
180
Degrees
Appendix C - Attaching the On/Off Key
to Non-Solenoid Units
Figure C-1: Attaching the On/Off Key