StorCase Technology DE75i-SW160 - Manual (Page 26)

DE75i-SW160 User's Guide - Rev. B00 StorCase Technology, Inc.
Appendix C - Optional Accessories 19
Figure C-1: Carrying Case
The optional molded plastic carrying case is designed to transport the DE75i-SW160 carrier
from one location to another in a safe, impact and moisture resistant environment. Its compact
dimensions, 7” long x 9” wide x 3.5” high, make it easy to carry and to store. The foam lining
is contoured to fit a single Data Express carrier with a 1-inch form factor (remove the foam
piece shown in the illustration above). Contact StorCase for further details and ordering
information.
Appendix C - Optional Accessories
Carrying Case
Drive Plug
Figure C-2: Drive Plug
The drive plug (part number DX75C/300C-PLUG) is designed to fill system or external enclosure
bays that are occupied by receiving frames that have no carrier units installed. The purpose
of the plug is to provide an attractive and functional method of directing proper air flow to the
other installed devices in the system or external enclosure.