StorCase Technology DE75i-SW160 - Manual (Page 10)

Introduction 3
DE75i-SW160 User's Guide - Rev. B00 StorCase Technology, Inc.
Figure 2: DE75i-SW160 Receiving Frame and Carrier
This User's Guide describes the steps required to install the StorCase Data Express DE75i-
SW160 removable enclosure inside a computer peripheral bay or external expansion chassis.
This guide supplements documentation provided with the host computer system, operating
system, and the drive to be installed within the DE75i-SW160 carrier.
General Description
The StorCase Technology Data Express ® DE75i-SW160 is composed of a receiving frame
which supports SCSI Ultra160 (LVD) interfaces and fits within a 5.25" half-height peripheral
slot. This 16-bit I/O can support up to 160MByte/sec transfer rates. The receiving frame
contains one removable drive carrier designed to provide durable and reliable mounting for
one 3.5" form factor, low-profile (up to 1" high), SCSI Wide, Wide Ultra, Wide Ultra2 or Wide
Ultra160 drive (Figure 2).
The DE75i-SW160 allows a drive to be removed and transported to another DE75i-SW160-
equipped computer or expansion chassis, and also provides the ability to secure sensitive data
by removing and storing the drive safely for future use.
NOTES: DE75i-SW160 requires LVD chassis and cabling.
DE75i-SW160 supports LVD implementations with a maximum of 9 drives (with
an available 9-device internal cable). Contact StorCase for further information.