StorCase Technology DE75i-SW160 - Manual (Page 18)

DE75i-SW160 User's Guide - Rev. B00 StorCase Technology, Inc.
Installation 11
Figure 9: Receiving Frame Mounting Holes
5. Adjust the front of the receiving frame so the carrier slides freely in and out on
the receiving frame guides. The position of adjoining peripheral units may
require adjustment.
6. To connect a drive to a remote activity LED in the computer system or expansion
chassis, connect the appropriate cable(s) to the receiving frame motherboard
option Pins 11 and 12 as shown in Figure 5.
7. Connect the I/O cable from the host adapter to the receiving frame. The Pin 1
indicator on the cable must be properly aligned. Refer to Figure 5 for the correct
Pin 1 location.
NOTE: No onboard termination is provided on the DE75i-SW160. External
termination must be provided.
8. Connect the power cable from the DC power supply in the computer or
expansion chassis to the power connector on the DE75i-SW160 receiving
frame. Refer to Figure 5 for the DE75i-SW160 receiving frame power
connector location.
9. Replace any expansion boards that may have been removed earlier. Replace the
system cover according to the manufacturer’s instructions.
10. Reconnect any system or peripheral cables removed earlier.