Adjusting the spin down/up timer, Figure 11: device spin down/up timer switch – StorCase Technology DE75i-SW160 User Manual

Page 21

StorCase Technology, Inc.

DE75i-SW160 User's Guide - Rev. B00

Installation

Figure 11: Device Spin Down/Up Timer Switch

Adjusting the Spin Down/Up Timer

NOTE:

The timer for device spin down is controlled by a small selector, located in a

cutout on the side of the DE75i-SW160 receiving frame as shown in Figure 11.

The amount of time required for a drive to spin down is approximately 15

seconds or more. This number can vary depending on the type of SCSI device

and manufacturer (some drives may require 45 seconds or more). The factory

configuration is set for 20 seconds. A different delay time may be selected with

the provided alignment tool. Refer to the SCSI device manufacturer's manual for

more information on required device spin down time.