StorCase Technology DE75i-SWC - Manual (Page 27)

20 Appendix B - Factory-Installed Options
StorCase Technology Inc. DE75i-SWC User's Guide - Rev. B00
Figure B-2: Hot Swap Board Details
Using the Hot Swap Board
Carrier Removal
Follow the procedures below to remove the DE75i-SWC carrier from the receiving frame
equipped with the Hot Swap option.
1. Verify that the drive is not active. If the system is on a network, make certain
other users are not accessing the target drive, then disable it from the network.
Dismount the drive.
2. Turn the DE75i-SWC key lock mechanism (located on the front of the receiving
frame), clockwise to the OFF position. This unlocks the drive from the receiving
frame and activates the Hot Swap Board. The unit number on the display will
begin flashing.