Speck Electronics LiLo - Manual (Page 17)

Chapter 3 Operation Section 13
In this section we hope to give you basic
information on the operation of the LiLo
and adequately describe its controls,
switches, and connectors.
The information in this section of the
manual is intended to help with the
technical process when using your LiLo.
Words alone could not adequately
describe how to adjust the controls for
every situation you might encounter with
the Lilo. You should experiment with
settings and routing techniques to achieve
the best results for any particular
situation. Your ears should be your best
gauge of how to adjust the settings on the
LiLo to make the sound fit your
requirements.
Before any attempt is made to operate the
mixer, it would be a good idea to set all
the mixers controls to their neutral
positions. This gives you a reference
point to work from when adjusting
controls and switches.
All volume controls, including aux sends,
aux returns, and master level controls
should be set to their full counter-
clockwise setting. All pan controls
should be set centered. All pushbutton
switches on the input channels and master
module should be set to the out position.
When any future reference is made to the
controls or switches of the LiLo, it will
be assumed that they have been set to
their neutral positions.
Overview
Default Control
Settings
Mixer Operation