Southbend TVES-30SC - Manual (Page 14)

I NSTALLATION E LECTRIC T RU V ECTION O VENS
P AGE 14 O WNER ’ S M ANUAL 1194659 REV 1
IN
S
T
A
L
L
A
T
IO
N
9. Insert two 1/4-20 bolts on each side (items "A" in the following diagram), as shown in the pictures
below. Screw them down into the threaded inserts of the optional mounting top on the lower unit, or use
a bolt and nut to secure if holes were manually drilled.
A
A
10. Reinstall Terminal Block Mounting Plate, insulation, exterior side panels and lower front panel that were
removed in Steps 3, 4, & 5 of this procedure.