Simaudio 850P Preamplifier - Manual (Page 7)

850P Reference Dual-Mono Preamplifier
____________________________________________________________________________________
7
Unpacking
The MOON 850P preamplifier and power supply/controller should be removed from its crate with care.
The following accessories should be included inside the box with your preamplifier:
9 AC power cable
9 ‘FRM-3’ Full Function remote control with three ‘AAA’ batteries (USA and Canada only)
9 Three (3) color-coded cables to connect the 850P preamplifier to it’s power supply/controller chassis
9 ‘SimLink’ cable with 1/8” mini plug terminations on each end
9 This owner’s manual
9 Warranty and product registration information (USA and Canada only)
Once the 850P is unpacked, inspect it thoroughly
and report any damage to your dealer immediately.
We suggest that you keep all of the original
packaging, storing it in a safe, dry place in case
you’re required to transport this product. The
customized packaging is specially designed to
protect the 850P from any potential damage during
transit.
Please write the serial number of your new MOON 850P in the space provided below for future reference.
Serial No.: ________________
Installation & Placement
The MOON 850P dual-mono preamplifier is very
heavy and should be placed on a solid, level surface.
You should avoid placing it near a heat source or
inside a closed cabinet that is not well ventilated as
this could compromise the preamplifier’s
performance and reliability.
If the surface you have chosen isn’t perfectly level,
each of the four (4) legs of both your 850P and it’s
power supply / controller are height adjustable;
carefully using your fingers, you can either raise
each leg by turning the cone underneath clockwise,
or lower each leg by turning it counterclockwise.
We strongly recommend that you leave these cones
mounted to the component at all times for reasons
related to both performance and aesthetics.