Simaudio 850P Preamplifier - Manual (Page 19)

850P Reference Dual-Mono Preamplifier
____________________________________________________________________________________
19
Remote Control Operation (continued)
Backlight Function
Your FRM-3 features a backlight capability that
allows you to effortlessly operate this remote control
in a darkened environment. Since battery lifespan is
substantially reduced when the backlighting feature
is activated, the FRM-3 includes 3 different
operational modes to preserve the batteries:
Default Mode (#1): The backlight is triggered on by
either moving the remote control (via an internal
motion detector) or by pressing any button on the
remote’s keypad; The backlight will remain
illuminated for a full five (5) seconds after the last
event (motion or pressed button). To activate the
“Default Mode”, press and hold the “CD” button for
three (3) seconds. The backlight will illuminate once,
very briefly for confirmation.
Button Mode (#2): The backlight is triggered ONLY
by pressing any button on the remote’s keypad - the
internal motion detector is deactivated; The
backlight will remain illuminated for a full five (5)
seconds after the last button is pressed. To activate
the “Button Mode”, press and hold the “AMP” button
for three (3) seconds. The backlight will illuminate
twice, very briefly for confirmation.
Off Mode (#3): The backlight feature is completely
disabled. To activate the “Off Mode”, press and hold
the “DAC” button for three (3) seconds. The
backlight will illuminate three times, very briefly for
confirmation.
Remote operation with multiple MOON components
Figure 6: Remote Operation with SimLink™ and 12V Trigger