Rocktron Taboo Twin - Manual (Page 37)

34
Parameter Description
TREMOLO The TREMOLO I/O parameter determines whether the tremolo is active or bypassed for the
current preset.
LOCATION The LOCATION parameter determines whether the tremolo is located pre-reverb or post-reverb.
Most vintage amplifiers configured the tremolo (or vibrato) Post-reverb.
DEPTH The DEPTH parameter determines the amount of modulation for the tremolo signal. Lower
DEPTH settings produce more subtle tremolo effects, while higher settings will result in a more
extreme tremolo effect.
RATE The RATE parameter determines the speed at which the tremolo signal modulates (or increases
and decreases in volume).
SHAPE The SHAPE parameter determines the waveshape of the tremolo signal. Selecting a different
waveshape produces a different tremolo effect.
TREMOLO Function
The Tremolo effect continuously varies the volume of the signal.
The P
ARAMETER
S
ELECT
control will allow you to access the following TREMOLO parameters: