Rocktron Taboo Twin - Manual (Page 34)

31
WAH-WAH Function
The Taboo Twin has an internal wah-wah which allows for an expression pedal to be used as a wah-wah pedal through
continous control changes. Use of this feature eliminates the need to run long audio cables out to a conventional wah-wah
pedal.
To use an expression pedal as a wah-wah pedal, connect it to a MIDI controller (such as a Rocktron MIDI Mate ™ ) and set
the controller’s MIDI channel to correspond with the Taboo Twin’s receiving MIDI channel. Then set the pedal’s control
number on the MIDI Mate to match the Wah Frequency parameter’s control number on the Taboo Twin. This control number
is set on the Taboo Twin in the "CONTROLLER ASSIG" function. (See "Controller Assignments" in Chapter 7 for more
information on assigning control numbers.)
The P
ARAMETER
S
ELECT
control will allow you to access these WAH-WAH parameters:
Parameter Description
WAH-WAH I/O The WAH-WAH I/O parameter determines whether the wah-wah is active for the current preset.
WAH FREQ The WAH FREQUENCY parameter allows you to manually sweep the frequency range of the
wah-wah via the P
ARAMETER A DJUST control. Selecting a frequency for this parameter and
storing the WAH-WAH parameter IN allows you to use the wah-wah as a fixed wah.