Dacor OB52 - Manual (Page 16)

14
Install an approved flexible gas line from the regulator 3.
to the gas line shut off valve.
Gas Connection - LP Gas Cylinder Hose
Connect the supplied 3/4” coupling/nipple to the gas 1.
inlet at the back right bottom corner of the appliance.
Connect the included LP cylinder hose to the nipple. 2.
Connecting the Gas
Gas Connection - Natural Gas
noTe
Units equipped for use with natural gas ship with a
•
regulator assembly with 3/4” pipe attached and an
additional 3/4” nipple.
The regulator assembly is also equipped with a 3/4”
•
to 1/2” reducer on the inlet side.
Connect the factory supplied regulator assembly to the 1.
gas inlet at the back right bottom corner of the appli-
ance. Make sure the arrow on the regulator points in
the direction of the gas flow (towards the grill).
Connect a 1/2” nipple to the regulator. 2.
Install an approved flexible gas line from the regulator 3.
to the gas line shut off valve.
Gas Connection - Whole House LP Gas
Connect the factory supplied regulator assembly to the 1.
gas inlet at the back right bottom corner of the appli-
ance. Make sure the arrow on the regulator points in
the direction of the gas flow (towards the grill).
Connect a 1/2” nipple to the regulator. 2.
Installation Instructions
regulator assembly
(Included pN 700597Ng)
1/2” Nipple (not included)
flexible gas line (not included)
natural gas
connection
regulator assembly
(Included pN 700597lp)
1/2” Nipple (not included)
flexible gas line (not included)
whole house lp
gas connection
lp cylinder hose connection
3/4” coupling/Nipple
(included) connect
to outdoor grill
lp regulator and hose
assembly (included)
pn 101578 for
oB52, oBs52
pn 72310 for
oBsB162, oB36, oBs36