Pitney Bowes DM1100 - Manual (Page 21)

DM1100™ Digital Mailing System Operating Guide
SV62146 Rev. D 2 - 5
Parts of the
Mailing System This section describes the parts of your DM1100™ mailing system and
includes:
• The Mailing System Exterior
• The Mailing System Interior
• The IntelliLink® Control Center
• The Main Screen
Mailing System
Exterior Refer to the diagram for the location of each component.
IntelliLink® Control Center - This contains the screen and key-
pad for communicating with the mailing machine and the built-in
postage meter (Postal Security Device).
Main Cover - Protect moving parts and prevent foreign objects
from entering the machine. The feed cover protects the feeder.
Wet/Dry Tape Lever - Move this lever down for dry tapes or
pressure-sensitive tapes; move it up to wet gummed tapes.
Stacker (not shown) - This is where mail is deposited after the
postage is applied to the piece of mail. It is located on the right
side of the machine. It may be a drop stacker, or an optional
U7PS Power Stacker.
Flats Guide - Keeps flats aligned while feeding.
Feed Rollers - Rollers that move the mail on the transport deck
into the feeder.
On/Off switch - Turns the mailing system on and off. This is
located on the lower left side of the feed deck.
Feed Deck - This is where you load the mail.
1
2
3
4
5
6
7
8