Activating new meters – Pitney Bowes E707 User Manual
Page 28
E707 METERS
28
Two steps must be performed to activate a meter:
(1) an account number must be installed;
(2) an inspection, using the POSTAGE BY PHONE®
refill process, must be done.
We recommend that you record the account number
below for future reference.
Pull the tape off the ink cartridge.
Set cartridge in meter.
Snap cartridge cover in place.
POSTAGE BY PHONE
Account Number
Step 1: Prepare new ink cartridge
Step 2: Connect Power
Activating New Meters
Connect power cord to meter.
Plug into wall outlet that is not
controlled by a switch.
This powers up the meter; there is no
on/off switch.