Step 2, Charging the aircraft battery, Important – ParkZone PKZ1570 User Manual
Page 3: Notice, Dc peak detection charger features
![background image](/manuals/740181/3/background.png)
3
� �
���
��
���
��
��
���
��
��
��
��
���
��
���
��
��
��
��
��
���
��
� �
��
���
��
���
�
Charging the Aircraft Battery
The ParkZone DC Peak charger uses unique peak
detection circuitry that ensures an accurate charge
every time and protects your Ni-Cd and Ni-MH batteries
from the dangers of over-charging. This charger
continually monitors the battery’s charge curve and
automatically stops charging when the peak charge is
detected. The peak detection charger will help avoid
damaging Ni-Cd and Ni-MH cells.
Important
: The battery should be charged shortly
before flying. If you charge the battery 12 to 24 hours
prior to flying, you will need to “re-peak” the battery
before you fly.
Notice
: You cannot charge option Li-Po battery
packs with the ParkZone DC Peak charger included
with this kit. You must use a Li-Po specific battery
charger. Failure to follow this warning could result
in a fire.
Note
: Charge time is an
estimate only of fully discharged
battery pack. Actual charge
times may vary.
DC Peak Detection Charger Features:
• Variable charge rate from 0.5 – 1.8 amps
• Trickle charge
• Uses automobile 12V power outlet
• Charges 5 – 10 cell Ni-Cd and Ni-MH battery packs
• LED charge indicator
Charging the Aircraft Battery
1. Using the dial on the side of the charger, select the
charge rate to 1.4 amps.
2. Connect the battery pack to the charger using the
included adapter.
3. Connect the charger to the 12V power outlet in
your automobile. The LED will continually blink while
the battery charges.
4. Charging is finished when the LED indicator glows
steadily. You should also notice at this time that the
battery is warm to the touch.
1000mAh
10.8V Ni-MH
1.4 amp
40 minutes
BATTERY CAPACITY
MAX. CHARGE RATE
CHARGE TIME
Note
: Damage to the charger and battery
will occur if you exceed the maximum charge
rate recommended.
Note
: Do not leave the charger and battery
unattended during the charge process. While
charging, place the battery on a heat resistant
surface and constantly monitor the temperature of
the battery pack. If the battery becomes hot at any
time during the charge process, discontinue charging
immediately. Do not allow children to charge battery
packs without adult supervision.
Step 2