D-Link DAP-1160 User Manual

Page 47

Section 6 - Troubleshooting

• Configure your Internet settings:

• Go to

Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab,

click the button to restore the settings to their defaults.

• Click the

Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings

button. Make sure nothing is checked. Click

OK.

• Go to the

Advanced tab and click the button to restore these settings to their defaults. Click OK three

times.

• Close your web browser (if open) and open it.

• Access the web management. Open your web browser and enter the IP address of your D-Link access point in the

address bar. This should open the login page for your the web management.

• If you still cannot access the configuration, unplug the power to the access point for 10 seconds and plug back in.

Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a

different computer.

2. What can I do if I forgot my password?

If you forgot your password, you must reset your access point. Unfortunately this process will change all your settings

back to the factory defaults.

To reset the access point, locate the reset button (hole) on the rear panel of the unit. With the access point powered

on, use a paperclip to hold the button down for 10 seconds. Release the button and the access point will go through

its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When

logging in, the username is

admin and leave the password box empty.