D-Link DAP-1160 - Manual (Page 40)

0 D-Link DAP-1160 User Manual
Section - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please
establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption
due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point
(192.168.0.50). Click on Wireless Settings on
the left side.
2. Next to Security Mode, select Enable
W P A W i r e l e s s S e c u r i t y , E n a b l e
WPA2 Wireless Security, or Enable
WPA2-Auto Wireless Security.
3. Next to Cipher Mode, select TKIP, AES, or
Auto.
4. Next to Personal / Enter prise, select
Enterprise.
5. Next to RADIUS Server enter the IP Address of
your RADIUS server.
6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port.
7. Next to Shared Secret, enter the security key.
8. Click Apply Settings to save your settings.
Configure WPA (Enterprise)