D-Link DAP-1160 User Manual

Page 23

Section - Configuration

Note: Bridge mode is not completely specified in WiFi or IEEE standards. It can works with other DAP-1160.Communication with other access points is not

guaranteed.

WEP64/128:

WPA-PSK/WPA2-

PSK:

Select WEP 64bits/128bits to limit communication to only those devices that share the same WEP settings.

Select WPA-PSK, WPA2-PSK to secure your network using a password and dynamic key changes (No RADIUS server

required).

The Wireless Network Name is a unique name

that identifies a network. All devices on a

network must share the same wireless network

name in order to communicate on the network.

If you choose to change the wireless network

name from the default setting, input your new

wireless network name in this field.

Click this button to choose the root AP from an available connection list.

This option is unavailable in Repeater mode.

Wireless Network

Name (Repeater

Mode Settings):

Site Survey:

Wireless Channel:

Enable Hidden

Wireless:

Auto channel selection is default setting. Input a new number if you want to change.

The channel used will be displayed.
The channel will follow the root AP.

Enable Auto

Channel scan: