Lan settings – D-Link DAP-1160 User Manual

Page 25

D-Link DAP-1160 User Manual

Section - Configuration

The DAP-1160 is set to Static by default. Select

this option if you do not have a DHCP server on

your network, or if you wish to assign a static IP

address to the DAP-1160.

Select this option if you are manually assigning

an IP Address.

LAN Settings

192.168.0.50 is the default IP Address of the

Access Point.

LAN Connection

Type:

Static IP:

Dynamic IP:

IP Address:

Select this option if you would like to have an

IP Address automatically assigned to the DAP-

1160 by a DHCP server in your network.

Subnet Mask:

Gateway address:

255.255.255.0 is the default Subnet Mask.

All devices on the network must have the

same subnet mask to communicate on the

network.

Enter the IP Address of the router in your

network.