D-Link DAP-1160 - Manual (Page 26)

6 D-Link DAP-1160 User Manual
Section - Configuration
Enable DHCP
Server:
Disabled is the default setting.
If you want to use the DAP-1160 as a DHCP server, to automatically assign dynamic IP addresses on the network, you
will select Enabled.
DHCP IP Address
Range:
If you have enabled the DHCP server function, enter the starting and Ending point of the IP address range for your
network.
DHCP Lease Time: Choose the length of time during which the DHCP function of the DAP-1160 automatically regenerates the IP addresses
to the devices in your network.
Dynamic DHCP
Client List:
Lists the devices on your network that are receiving dynamic IP addresses from the DAP-1160.