Hyundai H-CDM8046 - Manual (Page 20)

20
TA interruption function: the current traffic announcement is cancelled by pressing the TA key. But the TA
mode will not be off.
Note: When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic
program identification code has been received.
When TA is ON, traffic program identification code is not received during specified time.
EON TA LOCAL/ EON TA DISTANCE mode: The purpose of this key is to reduce unwanted EON TA
switching, which EON TA information was received from current station and the radio switched to that EON
linked station, but no information could not be received because the EON linked station is located too far
from that area. So the radio is switched back to current station again. In above operation, a customer listen to
a wrong program or mute sound for a while.
Use this mode to change between LOCAL and DISTANT
tuning mode.
- EON TA LOCAL: When the filed strength level of EON linked is less than the threshold level, the radio
does not switch that station, and any disturbances will be hardly heard.
When EON TA LOCAL mode is selected, "EON TA LO" on numeric display is indicated for a few
seconds.
- EON TA DISTANCE: EON TA switching is tried to implement by the information of current station.
When EON-TA DISTANCE mode is selected, "EON TA DX" on numeric display is indicated for a few
seconds.
Note: The initial mode is DISTANCE mode.
LOCAL mode is functional only in selecting and memorizing stations.