Hyundai H-CDM8046 - Manual (Page 13)

13
General operation
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press OPEN button on the panel to open the panel and press the RESET hole with a point object to restore the unit
to the original factory settings.
Power button
Press POWER button to turn the unit on.
Press it to switch the unit off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the
unit on it will resume the stored status which you set.
Volume control
Volume adjust
Rotate the VOLUME knob to adjust the volume level.
Setting the sound characteristics
Press repeatedly the VOLUME/ SELECT button to select the audio mode such as
VOL (volume), BAS, TRB
(treble), BAL (balance), FAD. Rotate the VOLUME knob to adjust the setting.
You can regulate the settings in following ranges:
VOL: 00, 02, ... 98, 100 (50 steps).
BAS/ TRB: -10, -8, ... 0, +2, +4, ... +10.
BAL: 10L, 8L, ... L+R, 2R, ... 10R.
FAD: 10F, 8F, ... F=R, 2R, ... 10R.