Mossberg Maverick 8 and 9 - Manual (Page 12)

10
Pivot the front portion of the elevator upward out of the receiver (Fig. 11-B). Squeeze
the two arms, which form the open end of the elevator assembly together sufficiently
to disengage and remove the elevator from the receiver (Fig. 11-C).
Remove the forearm/action slide assembly by sliding it forward and off the magazine tube.
CAUTION: Field disassembly is now complete! The shotgun should not be
disassembled further for routine cleaning or maintenance. Further disassembly
should only be performed at an authorized Product Service Center or by a
qualified gunsmith.
cleaning anD luBricaTion
With proper maintenance and care, your Maverick ® shotgun will provide you with years of
dependable service. Your firearm should be inspected and cleaned periodically to insure that it
remains in good condition. Clean your firearm as soon as possible after use. This is especially
important if your firearm has been exposed to moisture. For maximum performance and
continued satisfaction with your shotgun, periodic cleaning and lubrication are es-
sential.
Follow the instructions and use the equipment provided with a quality firearm cleaning kit.
Always be sure that the safety button is in the “ON” (SAFE) position (Fig. 2) and
that the firearm is unloaded before cleaning or lubricating your shotgun. Wear
eye protection during cleaning.
Normal use requires only that the mechanisms be free of excessive shooting residue. Very
little lubrication other than a light oiling of external surfaces to prevent rust is needed.
66626.indd 12 3/10/09 1:32:43 PM