Lumagen Radiance XE-3D - Manual (Page 9)

Section 2 – Overview
RadianceXE rev 091211 3
Section 2 – Overview
Front Panel
The front panel has a light-emitting-diode (LED) indicator, which is red when the unit is in “standby” and, by
default, is green when the unit is “on.” Note that the green “on” indicator can be turned off if preferred.
Rear Panel
There are six HDMI, and 12 analog, video inputs. Audio can be received on the active HDMI input, one of
four analog stereo inputs, or one of eight digital audio inputs.
There are two HDMI video outputs and two COAX audio outputs. Video can be output on one or both of the
HDMI outputs. Audio can be output on the HDMI outputs and/or both COAX outputs.
Additional connections are provided for LVTTL command input (38 KHz IR format), two 12-volt trigger
outputs, RS232 command and update, plus the 12 VDC power input.
These connections are described on the following page.