Livorsi DTS Controls - Manual (Page 7)

Livorsi DTS Controls- Three/Four Engine Installation APRIL 2012 Page 7 of 9
Neutral Safety Switch
The Livorsi DTS Control does not have a neutral safety switch. The start-in-gear
protection is controlled electronically by the propulsion control module (PCM).
Rigging the Control
NOTE: The following information was current at the time of creation, however it
may not be current at the time of installation. Please contact Mercury Marine at
920-929-5000, for the latest installation and wiring diagrams.
NOTE: For an explanation of Shadow Mode and its applications, please contact
Livorsi Marine, 847.752.2700. For detailed instructions on how to install Shadow
Mode for a three or four engine application, please contact Mercury Marine,
920-929-5000.
Avoid injury or product damage. Obstructions, such as braces and wiring, may be
unseen when looking at the front of the dashboard. Before drilling or cutting any holes
in the dashboard, check the area behind the dashboard for obstructions. Do not drill or
cut when obstructions are present.
CAUTION