Lingenfelter L850161410 Camaro Rear Valance v0.8 User Manual

Page 7

Page 6.

14. Remove the valance from the rear bumper.

Be careful not to break the clips. The clips are

illustrated by the arrows, but NOTE that not all

clips are shown in this picture.

15. Line up the LPE rear valance on the bum-

per to locate the positions of the holes you will

need to drill. This is much easier some one help-

ing you.

16. Mark these spots with a marker or by put-

ting paint on the end of the bolts that are mount-

ed inside the LPE rear valance

13. Remove the plastic valance energy ab-

sorber (already removed in this illustration) by

un-clipping the clips that are shown by the ar-

rows. There are four (4) clips total.

NOTE: There is a clip that is not shown in this il-

lustration on the driver side of the bumper.