Lingenfelter L850161410 Camaro Rear Valance v0.8 - Manual (Page 13)

Page
39. Replace all bolts in the wheel wells that
where removed in step 4 with the Torx 20 socket
and torque to 62 in-lbs (7 N-m).
12.
37. The sides of the bumper have clips that
line up with clips on the quarter panel.
38. Both the driver side and passenger side
will snap into place, this will ensure that every-
thing lines up correctly.
40. Connect the tail light wiring harness elec-
trical connectors on both side of the bumper.