Lingenfelter L850161410 Camaro Rear Valance v0.8 - Manual (Page 5)

Page 4.
5. This illustration shows the location of the
red clips that hold the bumper in place. Be sure
not to damage or lose these clips. If you are in
need of a replacement clip, the part number is
92223721.
6. Remove the bumper by pulling outward
on the driver and passenger side while lifting the
bumper away from the vehicle.
7. With the help of an assistant, place the
front bumper on a clean work surface as shown.
You will need access to both the inside and
outside of the bumper during this part of the
installation.
8. Un-install the passenger and driver side
turn signal lights.