Lingenfelter L850161410 Camaro Rear Valance v0.8 - Manual (Page 10)

Page
27. Re-connect the wiring harness electrical
connector that was removed in step 8.
28. The LPE valance sits farther back from
the OEM GM valance. Because of this the ex-
haust tips on the stock OEM exhaust and some
aftermarket exhausts will need to be relocated. To
do this you will need to cut the exhaust tips and
weld the supplied extensions in place. The sup-
plied extensions are designed to work with the
stock exhaust and may work with some aftermar-
ket exhausts. Custom extensions may be needed
for some applications.
9.
25. Re-install the passenger and driver side
reverse lights.
26. Re-install the passenger and driver side
turn signals.