Labconco 6-Port Manifold for FreeZone Stoppering Tray Dryers and Bulk Tray Dryers User Manual
Page 2
Labconco Instruction Sheet 7759400, ECO B139
Page 2 of 5
3. Slide the longer hose shipped with the 6-Port Manifold all they way up onto the 3 inch
diameter tube that extends down from the Tray Dryer. Place two hose clamps around the
hose and tighten just enough to hold them in place.
4. Attach the 6-Port Manifold to the support stand by first sliding the 3 inch diameter
vertical tube on the manifold through the hole in the support stand. Secure the manifold
to the support stand using the four screws that are supplied.
5. Slide the upper and lower hoses down and clamp securely.
Screws
Short
Hose
Long
Hose
Clamp
Clamp
Long
Hose