Labconco PuriCare Bedding Disposal Stations 3840020 - Manual (Page 28)

24
Product Service 1-800-522-7658
Chapter 5: Using Your PuriCare
Working In Your PuriCare
Planning
• Thoroughly understand procedures and
equipment required before beginning work.
• Arrange for minimal disruptions, such as room
traffic or entry into the room while the station is
in use.
Start-up
• Turn on fluorescent light and station blower.
• Check the airfoil and baffle for obstructions, and
note the indicator lights.
• Allow the station to operate unobstructed for 5
minutes.
• Wash hands and arms thoroughly with
germicidal soap.
• Wear a long sleeved lab coat with knit cuffs and
over-the-cuff rubber gloves. Use protective
eyewear. Wear a protective mask.
Wipe-Down
• Wipe down the interior surfaces of the station
with 70% ethanol, or a suitable cleaner, and
allow to dry.
Figure 5-1