beautypg.com

Servicing the rapidstill ii – Labconco RapidStill II 65200 User Manual

Page 24

background image

SERVICING THE RAPIDSTILL II

20

Fuse Replacement

(1)

Unplug the unit from electrical service.


(2)

Using a small screwdriver or coin, turn the slotted fuse holder ¼ turn counterclockwise.

(3)

Pull the fuse and holder straight out. Remove the fuse from its holder by pulling the
fuse straight out.

Replace the fuse with a proper replacement part only. DO NOT attempt to replace the
fuse with one of a higher amperage rating.

(4)

To reinstall the fuse, reverse the above steps.




Removing the Boiler

(1)

Unplug the RapidStill II from electrical service.


(2)

Turn the unit around to gain access to the boiler flask.

(3)

Remove the head of the boiler by pulling it straight up. If the head is stuck onto the
boiler, apply water to the joint to loosen it.

(4)

Pull the ring that secures the boiler straight up until it clears the neck of the boiler flask.
The boiler can now be removed.

(5)

To reinstall the boiler, reverse the above steps.