Labconco Purifie Horizontal Clean Benches 36125 Series - Manual (Page 20)

16
Product Service 1-800-522-7658
Chapter 3: Getting Started
Installing the Purifier Clean
Bench on a Labconco Base
Stand
Labconco offers a variety of accessory base stands in a
number of different configurations to suit your
particular needs. Stands can be ordered with preset
telescoping legs, or with a manually or electrically
adjustable variable height stand.
Telescoping Base Stands
These stands are available with either fixed feet or
caster wheels. The user sets the height of these stands
before installation of the Clean Bench. The height can
be set at 27.5 to 33.5 inches in 1-inch intervals, giving a
work surface height of 28.75 to 34.75 inches. The Base
Stands for each Clean Bench model are listed in Table
3-1 below.
Width
Clean
Bench
Model #
Base Stand
w/Feet
Model #
Base Stand
w/wheels
Model #
3' 36000 3746701 3746711
4' 36125 3746702 3746712
6' 36100 3746704 3746714
Manual or Electric Hydraulic
Base Stands
These base stands offer infinitely adjustable height
between 25.5 and 33.5 inches, giving a work surface
height of 26.75 to 34.75 inches. The height is adjusted
either by a manual (hand crank) or electric pump that
drives hydraulic rams in the legs of the stands. All of
the hydraulic stands are equipped with fixed feet, but
can be converted to caster wheels with the addition of
caster wheel kit #3784000. The Base Stands for each
Clean Bench model is listed in Table 3-2 below.
Table 3-1