Labconco Biological Safety Cabinets 34610 Series - Manual (Page 43)

Chapter 5: Using The Cabinet
Product Service 1-800-522-7658 38
User Selectable Features
The Purifier Logic Series Biosafety Cabinet offers the user unparalleled
flexibility and convenience. The operation of the blower, fluorescent and UV
lights can either be operated manually, or you may choose to use the Smart-
Start
™ feature that activates functions automatically when the sash is opened
or closed.
The UV lamp can be programmed to operate for a given time interval when
the sash is closed, before it shuts off.
NOTE: During the first fifteen seconds of operation, the Cabinet
performs an auto-diagnostic routine to check the operation of the
microprocessor. You cannot access the menu during this time.
NOTE: When you are in the menu mode, if a selection is not made within
30 seconds, the display will reset back to display mode.
NOTE: Pressing the appropriate touchpad button will override Smart-
Start
TM selections.
To access the menu, press the “MENU” button. The display panel will
show the first level menu. To select from the various menu options press
the “▲” or “▼” buttons until the selected option is displayed. Press
“OK” to accept that option, or press “MENU” to return to the previous
menu level.
For further explanation of the menu and its options, please refer to figure 5-5.
Timer Operation
NOTE: The timer button allows activation of an interval (countdown) or
stopwatch (elapsed) timer. The timers cannot be operated
simultaneously.
To access the main timer menu, press the “Timer” button anytime during
normal operation. The main timer menu is shown on the LCD display. Use
the “▲” and “▼” buttons to highlight the Interval or Stopwatch Timer. Press
the “OK” button to select the highlighted timer function.