Labconco Biological Safety Cabinets 34610 Series - Manual (Page 22)

Chapter 3: Getting Started
Product Service 1-800-522-7658 17
temperatures than the desired sample temperature. Experimentation is
necessary to achieve proper sample temperatures.
10. For chilled applications, the Temp-Zone work area comes with a drain
line installed that can be routed to the cabinet’s drain valve, if desired.
This Temp-Zone drain line installation is optional for chilled
applications should excessive condensation occur under the work
surface. Simply snap in the supplied press-fit elbow to the drain valve
shown in Figure 3-4. Follow the diagram from Figure 3-6 to finish
the installation.
Figure 3-6
Quick-Connect
Elbow Fitting
Circulator
(User-Supplied)
Circulator Tubing
and Insulation Temp-Zone
Optional
Drain Line
Drain Valve
Press-fit
Elbow
Prop Rod