Konig Electronic High definition DVB-S2 plug-in receiver - Manual (Page 24)

7.10 OK
1. During viewing or listening, press the OK key to pop up the TV
programme list or the Radio programme list.
2. Press the PR+, PR- keys to select the channel up or down, and then
press the OK key to play this channel in full-screen.
3. Press the keys to select the satellite.
4. Press the MENU or EXIT key to close this window.
7.11 Audio
1. Press
the L
R keys to enter the Audio window.
2. Press the keys to select between Left, Right, Stereo and Mono.
3. Changing the audio mode is only connected with the current channel, not
all the channels.
4. Press the MENU or EXIT key to close this window.
7.12 Recall
Press the PR key to switch the current channel to the previous channel.
7.13 FAV
1. Press the FAV key to pop up the favourite group window.
2. Press
the keys to select the favourites group.
Press the PR+, PR- keys to select channel up or down. Press the OK key on
the selected channel to view it in full-screen. Press the MENU or EXIT key to
exit.
3. If there is no favourite channel, the system will display“No FAV Channel!”
when you press the FAV key.
7.14 Teletext
Press the TXT key to open the teletext on the screen. If there is no teletext, the system will display“No Teletext
Data”. Press the EXIT key to exit.
7.15 Zoom
1. Press the ZOOM key to switch between Zoom*1, Zoom*2, Zoom*3, Zoom*4, Zoom*5, Zoom*6, Zoom*8,
Zoom*12, Zoom*16.
2. In zoom mode, press the PR+, PR- or keys to move the cursor up, left, right or down.
3. Press the MENU or EXIT key to exit.
8. More tools (For all the tools below you’ll need a USB WiFi
dongle!)
8.1 Network local setting
DHCP: Select between On and Off. When switched On the IP address,
Subnet mask and gateway items will turn grey and can’t be edited anymore.
Press the numbers 0-9 to input the address.
8.2 WiFi manager
Insert the Wifi equipment first, then search available enter net signal; input
the password to connect with the network.
8.3 Upgrade by network
1. Protocol: select between HTTP and FTP
2. URL type: select between number and string
3. URL: press the number keys 0-9 to input
4. User: press the number keys 0-9 to input the user name
5. Press the number keys 0-9 to input the password
24