D-Link DIR-301 - Manual (Page 37)

3 D-Link DIR-301 User Manual
Section 3 - Configuration
System Settings
Use this option to save the current router
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Use this option to load previously saved
router configuration settings. First, use the
Browse control to find a previously save file
of configuration settings. Then, click the Load
button to transfer those settings to the router.
This option will restore all configuration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the Save button above.
Click Enabled to use the JumpStart function.
If your wireless router uses JumpStart, please
check the adapter for instructions.
Use this option to reset the JumpStart feature.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
JumpStart
function:
Reset JumpStart: