beautypg.com

Internet setup, Dynamic (cable) – D-Link DIR-301 User Manual

Page 19

background image

1

D-Link DIR-301 User Manual

Section 3 - Configuration

Choose Dynamic IP Address to obtain IP Address

information automatically from your ISP. Select this option

if your ISP does not give you any IP numbers to use. This

option is commonly used for Cable modem services.

The Host Name is optional but may be required by some

ISPs. The default host name is the device name of the

Router and may be changed.

The default MAC Address is set to the WAN’s physical

interface MAC address on the Broadband Router. It is not

recommended that you change the default MAC address

unless required by your ISP.

The default MAC address is set to the WAN’s physical

interface MAC address on the Broadband Router. You

can use the “Clone MAC Address” button to copy the MAC

address of the Ethernet Card installed by your ISP and

replace the WAN MAC address with the MAC address

of the router. It is not recommended that you change the

default MAC address unless required by your ISP.

Enter the Primary DNS (Domain Name Server) server IP address assigned by your ISP.

This is optional.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the

default MTU.

Dynamic IP

Address:

Host Name:

MAC Address:

Internet Setup

Dynamic (Cable)

Clone MAC

Address:

Primary DNS

Addresses:

Secondary DNS

Address:

MTU: