Network filter – D-Link DIR-301 User Manual
Page 30
30
D-Link DIR-301 User Manual
Section 3 - Configuration
Network Filter
Select Disable MAC filters, allow MAC addresses
listed below, or deny MAC addresses listed
below.
The schedule of time when the network filter will
be enabled. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in
the
Tools > Schedules section.
Enter the MAC address you would like to
filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
Select a DHCP client from the drop-down
menu and click the arrow to copy that MAC
Address.
Configure MAC
Filter:
Schedule:
MAC Address:
DHCP Client:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.