DigiPower ePowerSwitch User Manual
Page 12
12
17. On the Desktop, right click “My Computer”. Open Properties.
18. Open the Device Manager. Wait
for approximately 30 seconds for
the “Human Interface Device” to
appear. Open the Human
Interface Device. Click on “Usb-
interface power device”. Click
OK.
19.
Open Windows Explorer. Open the appropriate 3½
″ Floppy Drive. Open the USB folder. Open
USBSetup.exe. Note: The USB setup icon must be green before you can run the USB setup program.
20. The Power Device Configuration
tool is loading