Xxx x, Xxx x no r x no r no r no r rev rev rev, Xx x $xx x x nor x 0 0 – HITEC Lynx 3D User Manual

Page 12

AUX

EDIT

AUX

DATA

EDIT

AUX

Expotential:

This feature is used to change the control travel from linear to nonlinear. Us the “Aux” +/- keys to
select channel #1 (Steering or #2 (Throttle), the use the “Data” inc/dec to select positive (+) or
negative (-) Expo. Positive Expo increases the sensitivity and negative Expo decreases it. To reset
back to the default, press the “Data” inc/dec buttons simultaneously.

Racer Tip

A very valuable feature, exponential allows you to change the servos travel from
proportional to non-proportional. Negative Expo desensitizes the initial movement and
positive Expo increase the sensitivity. So why should you use it? It all depends on your
driving style. Here a few ideas for why and when to use it.
Steering:

Negative Expo is most commonly used for steering. This makes the vehicle much less “twitchy” and easier to control
down the straight aways. A good starting point is -30%. Remember you will still get all the travel. If you were to use “+”
Expo the wheels would move more for the same amount of steering input. This tends to make the car very sensitive and
will you will tend to oversteer. Try changing these settings for yourself to see how it reacts to the different input.

Throttle:

A good rule of thumb is to use negative Expo for modified motors. This gives a broader power band a positive Expo with
stock mores for more punch. Another factor is the track conditions. Use negative for loose conditions and positive for
high traction. Again, experimenting will give you and idea what works best for your particular application and driving
style.

$XXX X

NO R X

NO R

REV

CHANNEL

EXP

AUX

EXP

CHANNEL

POINT

AUTO D/R

XX X

$XX X X

NOR X

EXP

REV

CH3

+ / -

PUSH TOGETHER

AUTO D/R

REV

BLINKING

DATA : 0 -- +/-125%
DEFAULT : 0%

+ / -

PUSH TOGETHER

+ / -

PUSH TOGETHER